DB West Vancouver
Store Blog
Look 586 SL E-Post
Posted: Aug 12 2011 in Deals
REGULAR $7499,
save $1000 & get it now for $6499!
Beautiful Bike
Dazzling Price
DB West Van has a LARGE Look 586 SL E-Post eagerly waiting to get out on the road! This ultra light bike (single-piece frame weighing 940g) with FULL DURA-ACE 7900 is the perfect ride for those looking to up the ante.
NEW ULTRA LIGHT CARBON COMPOSITION
The 586 SL has incredible comfort to stiffness ratio and has ride qualities of the previous 586 but with the luxury of a lighter performance, passing under the 950 grs mark and adopting the new front derailleur carbon tab.
LOOK HEAD FIT 2 HEADSET SYSTEM
This LOOK patented headset design allows for independant headset and stem adjustment. Headset adjustment is executed via a threaded insert that is installed on the HSC 6 fork's special steerer tube. The result is having your headset correctly adjusted even when you need to adjust or swap your stem. This new LOOK technology saves 40 grams through the elimination of the compression plug.
'E-POST' (E = ELASTOMER) SEATPOST WITH INTERCHANGEABLE ELASTOMERS
1) Anti-rotation: as the E-post is not round, it is always aligned with frame's centre line. 2) Vibration Dampening: uses replaceable elastomer blocks to help enhance ride comfort. 3) Carbon friendly tightening torque: 5 Newton/meters is enough 4) Three different density (black, red, or grey) elastomer blocks are included with each frame.
COMPRESSED FRAME DROPOUTS
The rear dropouts are directly compressed at the time when both the seat and chain stays are moulded, resulting in a single-piece rear triangle. The frame is lighter while blending optimal stiffness.
LOOK HSC6 FORK
The 100% carbon single-piece 'monobloc' fork weighs only 350g (uncut) and meets the NEW Standard EN 14781 Requirement (144 joule frontal impact). Using the same technology as the rear dropouts, the carbon dropouts are compressed at the same time the fork blades, crown and steerer are moulded. The integrated carbon conical bearing seat (45° race angle) allows for the direct fitment of the bearing, eliminating the need of an additional aluminum crown race. The HSC 6 is designed to be used with an 1-1/8'' upper and 1-1/4'' lower sealed bearing. The fork steerer tube is specifically shaped to be used with the new Head Fit headset sytem.
SLEEK ONE-PIECE DESIGN
LOOK proprietary technology makes it possible to manufacture single-piece 'monobloc' frames that are attractive and very light.
ULTRA LIGHT DESIGN - TWENTY YEARS 'SAVOIR FAIRE'
LOOK's twenty plus years of carbon technology allow us to manufacture a feather weight frame that is light without compromising the overall rigidity and ride performance. The 586 weighs only 940g with an uncut seat tube.
Blogs by Store
Blogs by Category
Store Maps & Directions
- Questions?.(JavaScript must be enabled to view this email address)
